What is it?
- Protects your valuables against moisture
- Ready to use refill bag
- Uses no energy
- Refreshes the air
- Works clean
- Works silently
What does it do?
Combats condensation, damp and stale smells. Moisture Absorber is odorless, soundless, doesn’t use energy and is easy to refill. The moisture absorber reduces a too high relative humidity level in all closed spaces with little or no ventilation. Ideal for basement, garage, attic, closet, caravan, boat, shed etc.
Wear protective gloves.
450g works for approximately 3 months in a room up to approximately 45 m³ and absorbs approximately 0,5 litres of water, depending on the temperature, humidity and size of room.
Directions for use
- INSTRUCTIONS FOR USE – REPLENISHING WITH REFILL BAG: Cut the packaging open carefully and take out the refill Bag. Remove the lid from the device and place the refill Bag in the container. Attention: make sure the bag does not stick outside the device. Replace the lid and Moisture Absorber is ready for use. Place the device on a solid and stable surface. Moisture Absorber is easy to empty once the salt has completely dissolved (dispose the empty refill bag). See separate instructions for emptying the device. Replenish with a new refill.
- EMPTYING THE DEVICE Open the device indoors over the toilet and empty the reservoir. Rinse the toilet well with water. Important: Spilled liquid can cause staining. In case of stains wash immediately with plenty of water and dab thoroughly dry. Repeat if necessary. Avoid contact with leather and metal: these materials are at risk of damage.
Points of attention
At lower temperatures the Moisture Absorber works more slowly and clumping can occur. Increasing the temperature will speed up the working again. Avoid contact with leather, wood, stone and metal, as these materials can be affected negatively.
Spilt fluid can cause surface marks. If fluid is spilt, it should be cleaned immediately using large volumes of water and dabbed repeatedly until dry. Avoid contact with leather, wood, stone and metal, as these materials can be affected negatively.
Store in well-sealed packaging in a cool, dry and frost free place.